Modern Techniques In Car Body Repairs

November 29, 2010 by  
Filed under Auto Repair, Featured

Your car may still be in good running condition, safe and fuel efficient, but if years of exposure to all the environmental elements had already taken toll on it, you might need to do something. After many years of using your car, you may find that its paint has already faded and that it already has some scratches, cracks, and dents that no amount of waxing can cover. Well, there are modern auto shops that offer excellent car body repairs to restore your investment. They offer a wide array of services depending on your needs and budget.

And today, there are already a lot of techniques used in restoring vehicles. Here are some of the modern techniques in car body repairs:

100% Auto Paint Match

Whether your car needs whole body painting, spot painting for covering dents, graphics removal, or others, the new paint should match the original car paint 100%. To achieve this, photo spectrometer is used to analyze the original paint of your vehicle. Then, a computerized auto paint color match system is employed to find the true color that will match the original color of your car. After this, the painting is done carefully to achieve a seamless finish. Once the paint has dried, your car will surely look like it’s just freshly taken from a showroom.

Paintless Dent Repair (PDR)

Dents are commonly caused by impacts when your vehicle comes in contact with other cars or other hard surfaces. And the problem is, dents can sometimes occur at or near the angular or curve surfaces of the car, in which case they are very noticeable and harder to repair. Today, paintless dent removal method is already in use to solve these problems. Special tools are used to press, knead, or rub down on the affected part until it is back to its normal shape. This should be done while ensuring that the paint does not get damaged. And for those dents on hard-to-reach areas such as the edge of the car’s floor, fill and spray methods are used.

Body Frame Straightening

For cars that experienced collision with another vehicle or object big enough to cause a longitudinal or lateral damage on the car’s frame, body frame straightening is required. A computerized tool is used in this process. An ultrasound technology measures the discrepancy of the frame alignment and then a laser is used to accurately align the frame back to its original shape.

SMART Repair

This is a technique used to remedy a very small damage like a chipped or scratched paint. This is quite harder because only the small affected area should be sprayed accurately. It is very useful among brand new cars in which the damage may be conspicuous since the whole body is still glossy and newly painted. Some auto shops even offer a mobile service and perform this repair right at your home or office, so you won’t be waiting for long before you can use your car. Just check online to find one near your address.

With these innovations in car body repairs, you can enjoy driving your car like brand new again. And, it will be easy to keep its value high in case you want to sell it in the future.

Do-It-Yourself Car Repairs And Car Maintenance

November 29, 2010 by  
Filed under Auto Repair Help, Featured

If you own a vehicle, there’s a great chance that a big chunk of the budget you allot for your car is for car repair and car maintenance. As you drive your vehicle daily and expose it to different elements, it experiences wear and tear. It’s important that you monitor its running condition to avoid problems. And when damage occurs, it’s also important that you do repair immediately. Despite the increasing cost of car repair, the fact is that you can still save on your car through do-it-yourself car repairs and maintenance.

DIY is a growing trend among many drivers and vehicle owners today. Although this requires some kind of knowledge in automotive, it does not only give big savings but as well as the satisfaction of truly owning your vehicle. There are basic and more advanced car maintenance and repairs that you can do. These include the following:

Cleaning, Car Washing, and Waxing

You don’t need a professional mechanic to do these for you, and you don’t need to be highly skilled in automotive to learn these basics. All you will need is to have the right cleaning and detailing materials to ensure that you will achieve your desired effect. With just a little time on your hand, you can reduce your trips to car wash and car detailing shops and you can save a lot of bucks.

Routine Fluid Changing and Refilling

Many of the systems in your car make use of different types of fluid in their operation. Other than fuel, there are oil and special water formulas that make your car work. Over time, these fluids are reduced due to evaporation or leaks, and you have to ensure that you refill them to avoid problems like overheating.

• Oil. This fluid is needed for lubricating the metal engine parts as they rub against each other. Without it, too much friction will be produced and the parts will heat up and get damaged. Over time, the oil also gets dirty and should be replaced.

• Coolant. This is a special type of water solution that circulates throughout the cooling system to absorb engine heat so that you won’t experience overheating. Regular coolant refilling is vital in keeping the engine temperature right.

• Brake Fluid. This fluid is crucial to the operation of the brakes. With not enough fluid in your system, the brakes may not work well and you may experience braking problems. Refilling your braking system should be done with caution and you must only use the right type of fluid.

Removal and Installation of Parts

Whereas many of the parts in your auto are complicated and dealing with them requires professional knowledge, there are others that are simple enough for average drivers. The addition of add-ons like spoiler, car bra, or wheel caps, for instance, can be done simply. And if you’re skilled enough, you can even do more serious part replacements when the need arises.

Yes, do-it-yourself car repairs and maintenance may take time, but the savings are all worth it. Plus, nothing beats being able to know the inner workings of your own car.

Car Repair Comparison Between Its Model And Manufacturer

November 29, 2010 by  
Filed under Auto Repair, Featured

When we buy our car, some of us choose to have a policy for repair but other may not as they would say that there is no need for them to have a car repair only if they take good care of their cars. They maybe right in some point but still, playing safe is better as we can’t avoid any circumstances and we can’t control the situation.

This is mostly the common situation that a car owner is facing whenever a car needs repair. Since there are a lot of manufacturers and models nowadays, it’s sometimes hard to locate a repair shop that specializes in every car repair. And in some point, advertisements may be confusing and sounds sweet.

A car manufacturer would always advice a car buyer to have a policy with them so it won’t be hard to have maintenance and a possible car repair whenever you needed to. But these may sound like an advertisement for us for we thought that they are only trying to sell their insurance policy. Well, this case is just a give a take relationship.

They take our money by paying extra for the repair policy and coverage but we also have the advantage to have our car repair in good hands and we can say that the repair is specialize since they are your own manufacturer. In this case, we don’t have to look around for the best repair shop thus saving our effort, time, and less frustration during damaged.

On the other hand, a business repair shop would encourage us to bring their car to them for maintenance and repair with a cheaper price. When you choose to have it that way, make it sure that the repair shop is not recycling any parts from their customers. You can make it sure by asking for a receipt every time they say that some parts must be replaced. Or another option is for you to have the parts bought yourself from any car spare stores to ensure quality of the spare and to make sure it’s new. But make it sure that you know what kind of spare you have to buy. It may vary from model to model and may not be compatible to all manufacturers.

Just be wise to choose a good option at all time. If you think you have no idea about car repair, maintenance, and other car stuffs, you better have it covered under the manufacturer’s policy so it will never be a big hassle on your part. But if you feels like you can manage the repair and you can find a reliable repair shop, then you can do the trick. Just don’t think of the money for this case.

Consider all the possibilities in the future, its not just about money, this is also about effort, time, frustration, and even savings in the future only if we choose the right decision.